Show It Works

Verification videos for AI coding agents: record the run, upload over MCP, share a viewer link.

От сообществаРаботаетНужен API-ключГлобальныйБесплатноТолько чтение

Что умеет

    Какие данные видит

    Нужен ли аккаунт

    Нужен API-ключ из настроек сервиса

    Verification videos for AI coding agents: record the run, upload over MCP, share a viewer link.

    Как подключить

    Как подключить Show It Works к Claude

    Адрес сервера, который нужно вставить в настройках Claude:

    https://showitworks.app/api/mcp

    1. Откройте Claude (сайт claude.ai или приложение для компьютера).
    2. Перейдите в Настройки → Коннекторы (в английском интерфейсе: Settings → Connectors).
    3. Нажмите Добавить пользовательский коннектор (Add custom connector).
    4. Вставьте адрес сервера, скопированный ниже, в поле URL удалённого MCP-сервера и нажмите Добавить.
    5. В чате нажмите + → Коннекторы и включите новый коннектор.

    Пользовательские коннекторы доступны на тарифах Free, Pro, Max, Team и Enterprise. На Free можно добавить только один. В Team и Enterprise коннектор сначала добавляет владелец организации в Настройки организации → Коннекторы.

    Авторизация

    После нажатия Добавить откроется окно входа в сервис. Войдите под своим аккаунтом и подтвердите доступ. Пароль Claude не видит.

    Как подключить Show It Works к ChatGPT

    Адрес сервера, который нужно вставить в настройках ChatGPT:

    https://showitworks.app/api/mcp

    1. Откройте ChatGPT в браузере (chatgpt.com). Нужен тариф Plus, Pro, Business, Enterprise или Edu.
    2. Один раз включите режим разработчика: Настройки → Приложения → Дополнительные настройки → Режим разработчика (Settings → Apps → Advanced settings → Developer mode).
    3. Откройте Настройки → Коннекторы и нажмите Создать (Create).
    4. Заполните форму: Название (любое), Описание (одна фраза, что делает сервис), URL MCP-сервера (скопируйте ниже).
    5. В поле Аутентификация выберите OAuth, если сервис требует вход, иначе Нет. Нажмите Создать.
    6. В новом чате откройте + → Приложения/Коннекторы и включите коннектор.

    Название раздела у OpenAI менялось (Connectors → Apps/Plugins). Если пункт называется иначе, ищите «режим разработчика» в настройках. В рабочих пространствах Business/Enterprise администратор должен разрешить пользовательские коннекторы.

    Авторизация

    При первом использовании ChatGPT откроет окно входа в сервис. Войдите и подтвердите доступ.

    Как подключить Show It Works к Cursor

    Адрес сервера, который нужно вставить в настройках Cursor:

    https://showitworks.app/api/mcp

    Быстрый способ: нажмите кнопку Открыть в Cursor ниже, Cursor сам предложит добавить сервер.

    Вручную:

    1. В Cursor откройте Settings → Cursor Settings → MCP и нажмите Add new global MCP server.
    2. Вставьте JSON, скопированный ниже, в открывшийся файл ~/.cursor/mcp.json (для одного проекта: .cursor/mcp.json в корне проекта).
    3. Сохраните файл. Сервер появится в списке MCP; при необходимости пройдите авторизацию по кнопке рядом с ним.

    Авторизация

    Если сервис требует вход, рядом с сервером в списке MCP появится кнопка авторизации.

    Список инструментов сервера (7)

    Технические названия из tools/list. Нужны только разработчикам.

    create_video_uploadWrite title, taskName, ownerContext and publicContext in English (code en, locale en-US) — this project's language — and follow that locale for dates and numbers. The answer says so when what you sent is not in it. Leave code, identifiers, commands and file paths exactly as they appear in the repository, and leave worktreeName as the checkout's own directory name rather than translating it. This creates a direct R2 upload for an MP4 or WebM recording, filed under the project this API key belongs to. Worktree and task are public; ownerContext is shown to project members only, never through the public link; publicContext is shown only when explicitly supplied as public-safe.
    complete_video_uploadPublish a pending recording after its direct upload finishes. Call only after create_video_upload and a successful PUT of the entire file to the returned upload URL; this tool does not upload bytes. Requires a project API key with video.upload permission. Checks the stored object's byte size, MIME type and MP4/WebM container signature, not the correctness of the work shown or the full media contents. On success, changes PENDING to READY and returns the recording; use get_video_link next to retrieve its public viewer link and report retainUntil. Anyone with that link can watch until retainUntil; delete_video can remove the recording earlier. A size, MIME type or container-signature mismatch refuses publication and initiates deletion of the uploaded object. Failure to inspect the stored object's metadata marks the recording FAILED. For either failure, create a new upload and upload the file again rather than retrying completion on that recording. Only PENDING recordings can be completed: calling again after success returns an error, so use get_video_link instead.
    list_videosList the recordings in this API key's project, including dashboard reviewer comments and viewed status. Expired recordings are omitted; each row's retainUntil is when that recording and its public link are deleted, and firstViewedAt is when someone first played the public link, or null if nobody has. Ignore expiresAt, which is upload-authorization plumbing and always reads as past on a published recording.
    list_tasksList the task names already used in this API key's project, so you can reuse an existing one instead of inventing a near-duplicate. Copy `taskName` verbatim into `create_video_upload`. Names are folded case-insensitively and on whitespace, so one entry can cover several spellings, listed as `variants`. `recordingCount` is how many recordings carry the task right now, and `untagged` counts the recordings filed under no task at all. A name is listed while at least one of its recordings is still inside its retention window — 14 to 60 days after upload depending on the project's plan — and once the last of them reaches that deadline the name goes from this list with it. `firstUsedAt`/`lastUsedAt` are upload times. Only your own uploads are counted by default; pass `mine: false` to count every project member's. Without `query`, entries come back most-recently-used first, `truncated` means more names exist than `limit` returned, and `totalTasks` says how many. Other optional filters: `taskName` (substring), `createdAfter`/`createdBefore` (ISO timestamps), `limit`. A filter narrows the recordings that are counted, so the counts and dates then describe that window rather than the project's whole history. Optional `query` instead returns the tasks of the recordings that best match a description of the work, ordered by match quality — only the best-matching recordings nominate a task, so that answer is a shortlist rather than the project's whole vocabulary, `totalTasks` and `truncated` describe just those tasks, and `untagged` is omitted. The counts and dates of a task shown that way still cover every one of its recordings, not only the matching ones. `query` matches by meaning in any language, and a query in English (code en, locale en-US) — this project's language — also matches on wording.
    search_videosFind recordings in this API key's project by meaning as well as by wording — describe what the session was about, or name a task, and the closest recordings come back ranked. Use it before inventing a new TASK value, to find the recordings an earlier session already filed under one. Optional filters: taskName (substring), mine (only your own uploads — unlike list_tasks, this one searches every project member's recordings unless you pass it), createdAfter/createdBefore (ISO timestamps) and limit. Expired recordings are never returned. A query in any language works, because matching is semantic; this project works in English (code en, locale en-US), and a query in that language also matches on wording, which is the more precise half.
    get_video_linkGet a public link for a ready recording, with the retainUntil deadline after which the link stops working. Report the expiry alongside the link.
    delete_videoPermanently delete a recording.