LiveVariant

Name: LiveVariant
Author: livevariant

Build, inspect and read adaptive A/B tests.

От сообществаСбоиБез входаГлобальныйБесплатноТолько чтение

Что умеет

Какие данные видит

Нужен ли аккаунт

Не нужен: сервер работает без входа

Build, inspect and read adaptive A/B tests. Config travels in the URL; no account or API key needed.

Как подключить

Как подключить LiveVariant к Claude

Адрес сервера, который нужно вставить в настройках Claude:

https://livevariant.com/mcp

Откройте Claude (сайт claude.ai или приложение для компьютера).
Перейдите в Настройки → Коннекторы (в английском интерфейсе: Settings → Connectors).
Нажмите Добавить пользовательский коннектор (Add custom connector).
Вставьте адрес сервера, скопированный ниже, в поле URL удалённого MCP-сервера и нажмите Добавить.
В чате нажмите + → Коннекторы и включите новый коннектор.

Пользовательские коннекторы доступны на тарифах Free, Pro, Max, Team и Enterprise. На Free можно добавить только один. В Team и Enterprise коннектор сначала добавляет владелец организации в Настройки организации → Коннекторы.

Авторизация

После нажатия Добавить откроется окно входа в сервис. Войдите под своим аккаунтом и подтвердите доступ. Пароль Claude не видит.

Как подключить LiveVariant к ChatGPT

Адрес сервера, который нужно вставить в настройках ChatGPT:

https://livevariant.com/mcp

Откройте ChatGPT в браузере (chatgpt.com). Нужен тариф Plus, Pro, Business, Enterprise или Edu.
Один раз включите режим разработчика: Настройки → Приложения → Дополнительные настройки → Режим разработчика (Settings → Apps → Advanced settings → Developer mode).
Откройте Настройки → Коннекторы и нажмите Создать (Create).
Заполните форму: Название (любое), Описание (одна фраза, что делает сервис), URL MCP-сервера (скопируйте ниже).
В поле Аутентификация выберите OAuth, если сервис требует вход, иначе Нет. Нажмите Создать.
В новом чате откройте + → Приложения/Коннекторы и включите коннектор.

Название раздела у OpenAI менялось (Connectors → Apps/Plugins). Если пункт называется иначе, ищите «режим разработчика» в настройках. В рабочих пространствах Business/Enterprise администратор должен разрешить пользовательские коннекторы.

Авторизация

При первом использовании ChatGPT откроет окно входа в сервис. Войдите и подтвердите доступ.

Как подключить LiveVariant к Cursor

Адрес сервера, который нужно вставить в настройках Cursor:

https://livevariant.com/mcp

Быстрый способ: нажмите кнопку Открыть в Cursor ниже, Cursor сам предложит добавить сервер.

Вручную:

В Cursor откройте Settings → Cursor Settings → MCP и нажмите Add new global MCP server.
Вставьте JSON, скопированный ниже, в открывшийся файл ~/.cursor/mcp.json (для одного проекта: .cursor/mcp.json в корне проекта).
Сохраните файл. Сервер появится в списке MCP; при необходимости пройдите авторизацию по кнопке рядом с ним.

Авторизация

Если сервис требует вход, рядом с сервером в списке MCP появится кнопка авторизации.

Список инструментов сервера (9)

Технические названия из tools/list. Нужны только разработчикам.

build_test	Creates a LiveVariant test and returns every URL needed to run it, plus a freshly generated stats secret. Pass `variants` to test one element, or `slots` to test several at once (hero image AND call-to-action, say). With slots the test optimizes the COMBINATION: one model learns how the elements interact, which two separate tests structurally cannot see. There is no algorithm to pick either way; every test runs the same joint model, sized from its shape. By default, nothing is registered anywhere: the config IS the test, encoded into the URLs, and the test's identity is a hash of it. Pass `publishableKey` on an account-enabled deployment to also register the new test to that key's organization, so it appears under My tests; the config and URLs are still the test, and registration failure is returned as a warning rather than failing the build. Editing a variant later produces a DIFFERENT test with its own empty history, which is usually what you want per campaign but is worth saying out loud to whoever you are building this for. The stats secret is returned once and never again. Only its hash goes into the config, so nobody, including this service, can recover it. Give it to the person who will read the results.
inspect_test	Decodes a test and describes it: slots, variants, context, and whether it can be served by redirect. Also lints it for the mistakes that only show up once a campaign is out, such as an email test whose context comes from geo (which a mail proxy answers about itself). Use this before sending anything, and to answer 'what is this link?'.
generate_priors	Takes YOUR estimate of how each variant will perform and converts it into the prior the model starts from, so a test does not spend its first visitors rediscovering what you already suspect. You supply the guess; this does the arithmetic and the capping. That capping is the point: a prior is expressed as pseudo-observations, and it is deliberately held weak enough that real data overrides it quickly. The response says exactly how many real visitors per variant it takes to wash your guess out, so you can judge whether you have been too confident. Being wrong here costs a little early traffic, not the test. Priors are outside the identity hash, so the test keeps its id, its URLs and any history it already has. Pass `when` to make the belief hold for ONE segment only ("image B is the one for the blue segment"). Without it the belief is about every visitor, which is a different and much stronger claim.
get_stats	Fetches a test's results and works out what they mean. Alongside the raw counts it returns the probability that each combination is genuinely best and the expected cost of stopping now and keeping the leader. Use those rather than comparing conversion rates by eye: a variant ahead 2/10 to 1/10 looks twice as good and is very close to a coin flip, and that mistake is the single most common way an A/B test gets called wrong. Multi-slot tests also report per-slot marginals: how each variant did across every combination it appeared in. Needs the stats secret. If you have the manage URL, its #fragment IS the secret and it will be used automatically.
get_test_status	Reports what the deployment's registry knows about a test: whether it is claimed into an account (and by which organization), and whether each redirect destination is a verified domain. Unverified destinations work, but visitors see a 'Redirecting you to…' continue screen first. When you see verified: false, tell the user to verify the domain under Settings on the dashboard; the three ways are a DNS TXT record, serving the well-known file, or having the SDK tag with their publishable key live in the site's source. If the test is unclaimed, remind them the manage URL claims it in one click when opened signed in. Requires the test's stats secret, the same as get_stats. A manage URL's #fragment is used automatically.
list_tests	Lists tests registered to the signed-in account, newest first, with cursor pagination and an optional case-insensitive name filter. Only exists on deployments with accounts, and only answers for an identified caller: unlike every other tool, WHOSE tests these are cannot be expressed as an argument. Each entry carries the encoded config, which inspect_test and get_stats accept directly.
register_test	Registers a test you built earlier to the organization a publishable key belongs to, so it shows under My tests and its stats are readable from the dashboard without the secret. Use this only when the user provides both the test's stats secret and a publishable key for an organization they administer. The stats secret must match the hash inside the config, and the publishable key identifies the organization to register into. Prefer passing publishableKey to build_test directly: it registers at creation in one step. Keyless tests cannot be registered this way (nothing to prove with); they register through the tag on a verified domain. The organization can remove a listing from its dashboard (the test itself keeps serving).
upload_image	Uploads an image to the deployment's asset store and returns its URL, for use as a variant's `image` (email tests) or `url`. The returned URL is deliberately not fetchable on its own: assets are only served with a short-lived signature that the serve endpoints mint per request, so uploading here does not create free static hosting. Use `previewUrl` (valid for an hour) to check what was stored. Storage is content-addressed: the id is the sha256 of the bytes, so uploading the same image twice is harmless and returns the same URL. Raster images only; SVG is refused because it can carry scripts. Not every deployment enables asset hosting, and this tool says so plainly when yours does not.
variant_brief	Returns the constraints to write or generate test variants against, for email or web, plus the rules that decide whether a test can be read at all once it runs. The one that matters most: one idea per slot. To vary two elements, give the test two slots and let it learn the combination, rather than bundling both changes into one variant and never learning which half worked. Ask for this before drafting variants, then produce them yourself against what it returns.